Building a 12 Point Roll Cage in the Off-Road Lamborghini Huracan
In todays episode we're building a roll cage!
Thanks to Keeps for sponsoring this video! Head to to learn more and get 50% off your first order of hair loss treatment.
Check out our friends at Rogue Fab if you need a bender or notcher:
And if you're looking for that awesome shifter, find a ton of them here:
❱ Shop -
❱ Patreon -
❱ Facebook -
❱ Instagram -
❱ Twitch -
Fareoh - Cloud Ten

  • 420people

    Ironic when he mentioned the fact that a straight bar at roof height for the halo was stronger. Hard turns/bends with a miniscule radius are definitely weaker. But an arch with a long radius is one of the strongest shapes in nature. Even the Super Trofeo has an arched halo for this exact reason. Turns out, those Romans were really onto something!

  • these PA parts
    these PA parts

    Imagine the world's first desil off road Lamborghini huracan



  • Steve Hewitt
    Steve Hewitt

    Why don't you rase the front of the seat? That will tilt the back of the seat...

  • Diego Alejandro Guillier Ramirez
    Diego Alejandro Guillier Ramirez

    after all , can you still get in? jajaj

  • Jordi lopez
    Jordi lopez

    Do you have or do you plan to make a video about the direction?

  • Dann Mohr
    Dann Mohr

    A Lamborghini off-roadie, hmmmmmmmm👍👍👍👍😎

  • damascusblade

    Please listen to those of us who've been there and done that. You're insane if you don't use the extra time you've been allotted due to the race postponement to figure out a way to lower the floor and make room for a proper suspension seat.

  • Buildin' Whatever
    Buildin' Whatever

    Not sure how you plan to weld out those tubes that are right against the roof line.

  • jose da costa
    jose da costa

    What about welding the roll cage 360 degrees inside the cabin ? Surely not poss if roof doesn’t come off? What am I missing

  • Andarilho Black Pill Imortal
    Andarilho Black Pill Imortal


  • Forsaken Ace
    Forsaken Ace

    I’m glad the mint got delayed. They did great with the burntican but I feel like it was rushed and is more for a statement and eye candy than performance on the track.

  • harrison256


    • Oscar O
      Oscar O

      Engines aren’t in yet

  • supercar society RatedEX
    supercar society RatedEX

  • Broke Dad’s Garage
    Broke Dad’s Garage

    Could you not lower the floor to allow the space needed for the seat ?

  • Michael Cox
    Michael Cox

    For helmet clearance, you need a "Gurney bubble," like the old GT40s. Then maybe there would be more room for a suspension seat.

  • Anthony Hak
    Anthony Hak

    you motivated me to do my own project check it out on my channel

  • Peter Przybyla
    Peter Przybyla

    Have you considered a gurney bubble in the roof? That would give you the clearance you need and allow a softer riding seat.

    • Brian Sowers
      Brian Sowers

      That’s a zagato bubble. Gurney stole the idea.

  • SFL RC24
    SFL RC24

    Just saw the Burntican in a Road & Track article. Congrats.

  • daniel jones
    daniel jones

    Hey have you tried a diamond blade for your chopsaw instead of the resin carbon discs They last longer and have less flex

  • Rich's Rides
    Rich's Rides

    Gutted that the Mint got delayed, but now you have all the time you'll ever need to smash this one out of the park, B is For The Win !

  • MrJy93

    just throw some RZR seats in there.

  • Rcs711

    I'm sure someone has already said this, but you shouldn't have any ground clearance issues. Just cut the floorboards and lower the mounting point for the seats.

  • Craig Dry
    Craig Dry

    Love this video Great job I was in steel fabrication while serving in the U.S . Navy. One of the first things they showed us is a piece of steel welded to aluminum. This is done with a dielectric strip . They use this to weld the superstructure (made with aluminum) of an aircraft carrier to the deck.

  • Tyler Weinhagen
    Tyler Weinhagen

    wheres the boat? :(

  • A Gavin
    A Gavin

    Hopefully you wront have to test how secure that role cage is

  • Malik Adee
    Malik Adee

    Mustang project ???????????

  • Sam Cregan
    Sam Cregan

    Why not chop and raise the roof?

  • Myke Rayven Villanueva
    Myke Rayven Villanueva

    Chris I'm waiting on repainting Oscar's Mustang

  • Dom 7
    Dom 7

    You Must cut out the plate for the right a polar under the plate is the Second vin number from your car ! Later you became problems by the proving of you car and registration by the race/ road registration

  • Jacob R
    Jacob R

    From someone who lives in Nevada first, thank you for saying the name right, and second the restrictions suck when it comes to any public events normally we’d have a bunch of motorsports stuff and COVID has stopped it all

  • Jim H
    Jim H

    I'm just so amazed this level of work can be done in a small home garage!

  • Never Give Up
    Never Give Up

    what happened to the boat ? Is it on another channel ?

  • Justin Deo
    Justin Deo

    Go full alex choi

  • Tyrel Thibault
    Tyrel Thibault

    I would recommend doing anything to get suspension seats

  • Coty Ford
    Coty Ford

    you should put half fenders on the front edge of the door like an rc buggy, protect the 4000 dollar doors lol

  • Francisco Grullon
    Francisco Grullon

    Every car youtuber has that one extra guy around the shop!!! Oscar puts them all to shame!!!

  • Joseph Pressinger
    Joseph Pressinger

    this needs rgb lighting in the engine bay. that grouped with a whopping sound system and a surfboard rack would seriously make it the world's coolest lamborghini!!

  • David Lavalle
    David Lavalle

    The build is pretty cool I would have considered an exocage it would have protected the shell first obstacle you hit or hits you is going to destroy that tub

  • Mr. Fixit Esq.
    Mr. Fixit Esq.

    Couldn’t they do a subfloor for the seat to get the clearance? You might need to get a custom seat worst case scenario.

  • Martinus Strydom
    Martinus Strydom

    Can we have vids more frequently

  • anesh Sookhayee
    anesh Sookhayee

    Hi chris grate work and also can you give us an update on all the cars

  • Lea Greenway
    Lea Greenway

    Is there anyway you could drop the floor where the drivers seat will go reinforce it and put suspension in

  • Ethan Macheras
    Ethan Macheras

    Roll cage looks great!

  • William Hutchinson
    William Hutchinson

    Can't wait for the LS boat content 👌👌

  • SuperTekBoy

    That cage looks awesome. :)

  • Water Lover
    Water Lover

    I need Oscar so he can build me a roll age for my mini

  • Censored 1
    Censored 1

    You're gonna need a Welder and a lot of confidence....Truth Bomb Dropped haha

  • che astbury
    che astbury

    I like the lamp haha

  • David Voinskiy
    David Voinskiy

    What if you did like a custom double roof scoop so that you can clearance your head and get more space in there ?

  • Drew Miller
    Drew Miller

    covid is fake

  • Billy Gribble
    Billy Gribble

    Because of covid lol. I'm so sick of that fake shit...that word isn't used in my house.

  • _car-enthusiasts_

    Bolt the front of the seat to a hinge and weld shocks to the back of the seat🤷🏽‍♂️🤷🏽‍♂️not alot of travel but something is better than nothing

  • futte2303 #shquad
    futte2303 #shquad

    What abaut The boat

  • Andrew Mohamed
    Andrew Mohamed

    Finally !!!!

  • rien smeets
    rien smeets

    Imaging doing this with a ferrari

  • Josh C
    Josh C

    One more time for the people in the back... "PLEASE GET NEW AND BETTER TIMELAPSE MUSIC" the same damn songs all the time

  • Jack Mossman
    Jack Mossman

    Good to see actual progress on things that will be important during tech. Still interested to see how the rear axle will clear the frame at droop

  • Rowan Emerick
    Rowan Emerick


  • Ryan fritz
    Ryan fritz

    Just 1 door bar? At the very least x bar it since its a race car. Honestly should have been Nascar style door bar on the driver side.

  • Don Broach v8sten
    Don Broach v8sten

    You are going to hate life with those seats. They are going to beat the hell out of you. Look into suspension seats. Those are like sitting in a trampoline

  • Zach Weinberg
    Zach Weinberg

    Why don’t you make your roll cage go through the roof and effectively be outside and cut holes in the roof to let the bars through


    It's gonna look sick! I think you should paint it yellow n black when you put the Lambo body on it!

  • Stephen Gutsch
    Stephen Gutsch

    You guys better pack an inversion table with you when you go to race that thing without suspension seats, it’ll make it so much better for you otherwise you’re just gonna keep compressing your spine and cause injuries.

  • Richrd Lewis
    Richrd Lewis

    Covid, what covid?

  • Car Lover Photography
    Car Lover Photography

    Could have just bought a urus

  • armando patane
    armando patane

    Y’all are quite the fabricaters

  • Jacob Davis
    Jacob Davis

    He goes “we have drawings of the cage” and then proceeds to make mistake after mistake and waste tubes by winging it. H is for Hackjob at best

  • HvT

    Even if I had hair, I would shave it off.

  • Tom Lauda
    Tom Lauda

    the most interesting build since... you know, the one who shall not be named.

  • Tom Y
    Tom Y

    You should design some sort of removable screen for road driving. Like 20+ bolts holding on some Lexan. Then remove for rally.

  • romanus chukwu
    romanus chukwu

    I was thinking If possible you get a custom seat with the suspension located beside (two side) or behind the seat With extra damper below, that will give you more head room on like the conversational race seat suspension located below the seat

  • Jan Ivo
    Jan Ivo

    I think you should cut a hole in the roof and make it like the old 70s racecars with a little bubble cutout above your head so that it fits. Not only is it practical and you can reuse the seats it also makes it look cooler

  • Leland Carter
    Leland Carter

    Need to drop the floor pan a few inches to make room for a suspension seat.

  • Ahmet Cem TURAN
    Ahmet Cem TURAN

    Time to create a "Gurney bubble" like in the Daytona Cobra for Dan Gurney.

  • Filip Johansson
    Filip Johansson

    what happened with the custom single seat race car? don't get me wrong I love the off-road huracan videos but I was really exited about the single seater

  • Michael Schneider
    Michael Schneider

    Look at Kibbetech YT page on their off road cages/trophy truck tube frame builds for more ideas on the roll cage and tips/tricks.

  • Black Storm
    Black Storm

    This is gonna be a stiff boi

  • Christopher DuBrul
    Christopher DuBrul

    With the amount of body rigidity you are throwing on this thing, I hope the motor you throw in it is constantly trying to twist this thing into a pretzel.

  • UncleJoe
    UncleJoe you're building a it!

  • frederic rike
    frederic rike

    Are you trying to tell us "B is for Butt Bashers"? Just a question; You are thinking the "DOM" isn't very special? Did you see the invoice for the tube you bought? Drawn Over Mandrel tubing, size for size ain't cheap in Dallas , Texas. Having rethought my opening crack and been out boonie bashing a time of three, I thought I'd suggest 1 1/2" thick gel pads for seat bottoms, like the ones for wheelchair bound patients. It might save you and co pilot from becoming chair bound your selves.

  • Austin_dyer18

    The suspension seat is so when you bottom the car out it gives your body a place to go making the strain on your back less

  • Austin_dyer18

    The suspension seat is so when you bottom the car out it gives your body a place to go making the strain on your back less

  • Austin_dyer18

    You better build the rear of that car stronger to take being rear ended cause if you don’t hear the siren they will smash into the back of you to let you know to move out the way

  • Ontarionorther Boys
    Ontarionorther Boys

    What happened with the boat or did that project fail too?

  • Austin_dyer18

    Chromoly tubing if your real baller

  • Austin_dyer18

    Chromoly tubing if your real baller

  • Randy Hurst
    Randy Hurst

    Anybody else missing the boat vids??

  • Shawn Wiedner
    Shawn Wiedner

    I missed you guys...

  • Ryan Kiroff
    Ryan Kiroff

    idk if he simply just loves it or what but im really wondering when hes going to update his super pixelated intro

  • Twisted SxS
    Twisted SxS

    Should have enough room under car to counter sink a seat into the floor no?? Kinda wish Alex showed how to bend a bit more. I’m building a budget SXS from scratch always like to learn more about bending and notching. As always though great video!

  • Mason jessey
    Mason jessey

    Hey what’s stoping you from fabing a pocket for the seat to sit down in? Saying if it follows the rules but it’s not a part of the roll bar system, you could easily make a 1.5 pocket and than have plenty of room and pitch it so you can lean back and than go under and just reinforce the whole area, Gat back with me thanks.

  • Michael Hughes
    Michael Hughes

    Please do what you have to do to use the suspension seat! I'd hate to see you guys have permanent injuries. No reason for that.

  • tim mckinney
    tim mckinney

    Cut a hole in the floor drop your suspension for seat down in a tub

  • Lamster 66
    Lamster 66

    Where are the Texas Speed engines for that boat?

  • Dawson Jobe
    Dawson Jobe

    With the problem of tight seating and no room for suspension seating have you considered cutting out the floor more in order to create a new lower floor that could fit a better seat.

  • TheSpark878

    I was more interested in the boat that he was ruining than this Lamborghini that he is ruining. Can we have more boat please?

  • Brett Begani
    Brett Begani

    Yeah! SnowCross! See you there!

  • RANDALL Foster
    RANDALL Foster

    I bought a circular saw blade at harbor freight , you can use that for cutting plate steel , honest it works !

  • Jay Simons
    Jay Simons

    New drinking game, Take a shot every time he says "there" and "here"....good fkn luck! bwahahaha